ThunderBorg - Powerful motor controller mounted to your Raspberry Pi
The ThunderBorg motor controller
- Dual motor controller
- Power input Voltage 7.0-35.0V
- Power output Current Max 5A per channel continuous
- Speed Control via PWM and bidirectional
- Controls 2× DC motors or a single stepper motor (4,5, or 6 wire)
- Battery voltage monitoring for the full input range
- 5V regulator for powering the Raspberry Pi
- 24bit 16 million colour super bright RGB LED
- Easily add additional ThunderBorgs to add more motors via cables
- Uses I2C SCK/SDA and 3.3V/GND pins for communications
- Mounts directly onto the GPIO of most Raspberry Pis
- Optional RasPiO InsPiRing support
- Raspberry Pi not included
Overheat protection, under voltage lockout, and short circuit protection.
The ThunderBorg Lid
- Second 24bit 16 million colour super bright RGB LED
Can be controlled independently of the ThunderBorg LED :) - 9V style connector for 9V batteries or AA battery packs
- Power switch to easily disconnect batteries
- Enough space to fit a 10x AA battery pack (12V with rechargeables)
- Soldered directly onto the ThunderBorg to save space
- Extra mounting holes for secure mounting to both Pi Zeroes and Pi B+ / 2 / 3
- Raspberry Pi not included
Overheat protection, under voltage lockout, and short circuit protection.