odroid-C2 compatability

Would the Picoborg be compatible with the Odroid-C2? In particular the header pinouts?

piborg's picture

It should be compatible with the Odroid-C2 as the GPIO header is nearly identical to the Raspberry Pi.

The GPIO pins to use are:

  • Motor 1: pin 7, GPIOX.BIT21
  • Motor 2: pin 12, GPIOX.BIT10
  • Motor 3: pin 24, GPIOX.BIT1
  • Motor 4: pin 26, GPIOY.BIT14

thanks for the prompt response.

Subscribe to Comments for "odroid-C2 compatability"