BattBorg UBS powerplug

Submitted by geirha75 on Thu, 12/31/2020 - 14:42

Forums:

Hi

Can I attach poweroutput from BattBorg to USB power input Raspberry PI Zero W? I see you attach the Battborg output directly to boardpin. I can't do that..Most of my pins are occupied.

piborg's picture

piborg

Sat, 01/02/2021 - 13:26

Unfortunately BattBorg does not come with an adaptor to connect it to the micro USB connector.

You only need to connect two pins from the BattBorg to the GPIO:

  1. One of the 5V pins
    https://pinout.xyz/pinout/5v_power
  2. One of the ground (GND) pins
    https://pinout.xyz/pinout/ground
Images: 
Subscribe to Comments for "BattBorg UBS powerplug"