Battery Pack not delivering power

Submitted by jehurley17 on Sat, 05/18/2019 - 21:41

Forums:

The battery pack with 10 AA batteries is not delivering any power to the Thunderborg Lid. I have tested the battery pack and it is delivering juice. When I plug the pack into the board nothing happens.

I am able to Power the Raspberry PI from the USB connection but that is the only item I am able to get to run. The Raspberry PI turns on the Thunderborg Lid; it briefly flashes blue then solid red. I am unable to get the motors to turn.

When I disconnect the USB and connect the battery pack nothing happens

piborg's picture

piborg

Sat, 05/18/2019 - 22:41

Have you moved the yellow power switch to the on position?

With the battery pack and Raspberry Pi connected the LED should turn on as soon as the switch is turned on.

Images: 

jehurley17

Sat, 05/18/2019 - 23:53

Thank you! It works now that I have turned it on. Apologies for not reading all the directions thoroughly.

Subscribe to Comments for "Battery Pack not delivering power"