Submitted by JonnyAlpha on Wed, 02/21/2018 - 17:57
Hi;
What is the easiest solutuon for using a 2.4Ghz Radio Transmitter and Receiver (As used for model planes / Helos / Drones / QuadCopters etc) to control a Raspberry Pi robot fitted with a ThunderBorg Motor Driver Board.
TVM
piborg
Thu, 02/22/2018 - 16:33
Permalink
Navio+
I have had a bit of a hunt and the Navio+ might do what you need: https://docs.emlid.com/navio/navio+/ardupilot/hardware-setup/
It talks about accepting input from 2.4 GHz RC receivers with PPM output, which might be good enough.