BattBorg and UP Board

Submitted by Piero78 on Mon, 12/26/2016 - 11:24

Forums:

Hi, I use the BattBorg to power my Raspberry Pi 2 Model B and it's very good. I've a question about the BattBorg and another board, the UP Board (http://up-shop.org/up-boards/48-up-board-1gb-16-gb-emmc-memory.html). This board has the same pinout of the RPi, but I'm not sure if it's compatible. Can you give me a response?
Thanks.

piborg's picture

piborg

Tue, 12/27/2016 - 12:00

It is not entirely clear, it may work or it may not.

The two things I am not sure about based on that link:

  1. Since there is no specification for the GPIO it is unclear if the board can be powered from the GPIO pins or not
  2. The board has a 3A power input, BattBorg only works upto 1.5A.
    This means BattBorg might not be powerful enough to run the board

It might be worth asking them if a board like BattBorg will work with their boards.

Subscribe to Comments for "BattBorg and UP Board"