The best thing to do is remove the BattBorg completely.
With the BattBorg removed getting cables swapped should not damage GPIO pins in general.
This will mean using a USB supply to power the Raspberry Pi.
Once everything with the board is working it should be safe to re-attach the BattBorg.
piborg
Thu, 09/22/2016 - 10:33
Permalink
Testing connections
The best thing to do is remove the BattBorg completely.
With the BattBorg removed getting cables swapped should not damage GPIO pins in general.
This will mean using a USB supply to power the Raspberry Pi.
Once everything with the board is working it should be safe to re-attach the BattBorg.