Resetting the I2C address to 36?

Submitted by METTAUK on Sun, 06/19/2016 - 00:02

Forums:

OK i messed up with 

cd ~/ultraborg
python
import UltraBorg
UltraBorg.SetNewAddress(0x11)

which worked just fine, then realised that I dont need to do this, I only have 1 UltraBorg. I then tried to reset it to 36 (0x24) so that all the example scripts would work without having to edit to UB1 UB2 etc. but I cant seem to get it to go back to factory default?

Also when I try to run a python script importing PicoBorgRev and UltraBorg either one comes up as not found depending which directory I'm in.. diddyred or ultraborg?

Guessing I need to set the path or something when using 

...
import UltraBorg
import PicoBorgRev

Unlike import time etc which seem globally available?

piborg's picture

piborg

Sun, 06/19/2016 - 11:04

You are nearly there with resetting the address, but it is 0x36 instead of 36:

cd ~/ultraborg
python
import UltraBorg
UltraBorg.SetNewAddress(0x36)

The easiest way to use both is to copy the missing script into the same folder.
For example:
cp ~/ultraborg/UltraBorg.py ~/diddyred/
should copy the UltraBorg module so that it can be used from the ~/diddyred folder.

METTAUK

Mon, 06/20/2016 - 10:03

Thank you.

Subscribe to Comments for "Resetting the I2C address to 36?"